MTL 201-202 ATEX - ACD
INDUSTRIAL VACUUM CLEANER WITH ATEX CERTIFICATION AND ACD

The ATEX MTL 200 BP and BL industrial vacuum cleaner, in ACD version and with ATEX double certification for internal zone 20 and external zone 22/21, has been designed to vacuum combustible dust in total safety both in working environments with explosive atmospheres and in areas not classified where ATEX certification is not required.
For ATEX certified models, our technical team has developed an innovative single-phase Brushless or Bypass head, protected by the Ex tb certified safety enclosure that prevents the entry of combustible dust preventing explosion risks.
The container is made of stainless steel AISI304 with a capacity of 40 liters. The antistatic polyester filter M and the absolute filter HEPA are standard for maximum filtration efficiency up to 99.995% of particles with 0.18 μm.


OTHER SETUPS

MTL 202 ACD
ACD INDUSTRIAL VACUUM CLEANER FOR NON-CONTINUOUS APPLICATIONS 

  • Cement
  • Ceramics and pottery industries
  • Building and construction
  • Electronics
  • Surface preparation
ACD classified industrial vacuum cleaner for combustible dust

The risks of explosion are also present in working environments that are not classified as explosive atmospheres where operators treat combustible dust on a daily basis.
With two 2.3 Kw bypass motors, the compact MTL 202 ACD is the ideal solution for cleaning and maintenance, focusing on worker safety.
The integrated Dustop filter cleaning system ensures the maintenance of high filtration performance, essential for the protection of the engine and the prevention of potential explosion hazards. The release container can be replaced by a disposable bag in the Endless Bag version for safe and efficient collection of the aspirated material.

ADVANTAGES

  • Largest surface filter in its category
  • Tangential suction inlet with integrated separation cyclone
  • Complete steel construction
  • Two powerful by pass motors with independent cooling
  • Compact and mobile
  • Easy filter replacement
  • Stainless steel AISI304 collection tank
  • Motor with very long service life
  • Dustop filter cleaning system
  • Adjustable height to facilitate transport on vehicles
  • Endless Bag
  • Vacuum powerhead Ex tb Dust Tight IP64 certified
  • ATEX accessories and non-metallic parts tested
  • Compliant with EN 17348: DRY TYPE

DATASHEET

Index UnitMTL 202MTL 202 ACD LP
Power kW2,32,2
Max water liftmmH₂O25002.500
Max air flowm³/h360360
Suction inletmm5050
Noise level (EN ISO 3744)dB(A)7476
MarkingII 1/-D Ex h IIIC T80°C (Internal) Da/-II 1/-D Ex h IIIC T80°C (Internal) Da/-
Atex zonesACD EX 1/- DCE ACD EX 1/-
Filter TypeCartridgeCartridge
Collection tank
Capacityl2020
Dimensionscm52x63x104h54x69x134h
Weightkg3555
VoltageV - Hz230 - 50/60 1~
Surface - Diametercm²-mm30.000-360
Material - EfficiencyIEC 60335-2-69Polyester - ANT M
Discharge system
Download MTL 202Download technical sheet
Download MTL 202 ACD LPDownload technical sheet

MTL 201 1/3D
ATEX-CERTIFIED INDUSTRIAL VACUUM CLEANER FOR INTERNAL 20 ZONE AND EXTERNAL 22 ZONE

  • Cement
  • Ceramics and pottery industries
  • Building and construction
ATEX certified industrial vacuum cleaner for internal 20 zone and external 22-21 zones

The MTL 201 model with ATEX double certification for internal zone 20 and external zone 22 has been specifically designed to ensure the safe vacuuming of combustible dust in working environments at medium explosion risk.
In particular, the ATEX certification for internal zone 20 ensures the prevention of the high risk of explosion due to the accumulation inside the vacuum cleaner of the vacuumed combustible material.
The single-phase bypass motor that makes it suitable for non-continuous applications and for less than 3 hours a day, is protected by the Ex tb certified safety enclosure.

ADVANTAGES

  • Tangential suction inlet with integrated separation cyclone
  • Complete steel construction
  • Compact and mobile
  • Easy filter replacement
  • Additional HEPA filter (99,995% on 0,18 micron) included
  • Stainless steel AISI304 collection tank
  • Dustop filter cleaning system
  • Vacuum powerhead Ex tb Dust Tight IP64 certified
  • ATEX accessories and non-metallic parts tested
  • Compliant with EN 17348: DRY TYPE

DATASHEET

Index UnitMTL 201 1/3D
VoltageV - Hz230 - 50/60 1~
Power kW1,1
Max water liftmmH₂O2.500
Max air flowm³/h180
Suction inletmm50
Noise level (EN ISO 3744)dB(A)74
MarkingII 1/3D Ex h tb IIIC T80°C (Int) /T95°C (ext) Da/Dc
Atex zones
Filter TypeCartridge
Surface - Diametercm²-mm30.000 - 360
Material - EfficiencyPolyester - ANT M
Cleaning systemDustop
Capacityl20
Dimensionscm52x63x112h
Weightkg32
Download MTL 201 1/3DDownload technical sheet

MTL 201 1/2D
ATEX CERTIFIED INDUSTRIAL VACUUM CLEANER FOR ZONE 20 INTERNAL AND ZONE 21 EXTERNAL

  • Cement
  • Ceramics and pottery industries
ATEX certified industrial vacuum cleaner for internal 20 zone and external 21 zone

Safety, efficiency and durability are the watchwords for the new MTL 201 1/2D model.
Equipped with ATEX double certification by a third part, it has been designed by our technical team to offer companies operating in areas at high risk of explosion. It is the perfect solution to vacuum combustible dust in total safety.
The brushless head, protected by the special Ex tb certified safety enclosure, does not require routine maintenance and perfectly meets the needs of continuous and heavy vacuuming above 3 hours a day. The cartridge filter is cleaned using the integrated counter-current air filter cleaning system.

ADVANTAGES

  • Tangential suction inlet with integrated separation cyclone
  • Compact and mobile
  • Easy filter replacement
  • Additional HEPA filter (99,995% on 0,18 micron) included
  • Stainless steel AISI304 collection tank
  • Motor with very long service life
  • Dustop filter cleaning system
  • Vacuum powerhead Ex tb Dust Tight IP64 certified
  • ATEX accessories and non-metallic parts tested

DATASHEET

Index UnitMTL 201 1/2D
VoltageV - Hz115/230 - 50/60 1~
Power kW1,1
Max water liftmmH₂O2.250
Max air flowm³/h215
Suction inletmm50
Noise level (EN ISO 3744)dB(A)74
Marking
Atex zones
Filter TypeCartridge
Surface - Diametercm²-mm30.000-360
Material - EfficiencyPolyester - ANT M
Cleaning systemDustop
Capacityl20
Dimensionscm52x63x112h
Weightkg32
Download MTL 201 1/2DDownload technical sheet

Ask for a free quotation